Billiard cue Repair set small

• Article code: 226950
• Availability: In stock
• Delivery time: 1-5 workdays

Contents: 1 tube Tweeten ten minute tip glue 2 Triangle billiard chalks 2 small repel spots for billiard cloth 2 large black and white repel spots 12 Tweeten economic tips 1 tip file with extra sandpaper 1 tip glue clamp 1 iron-on repair paper for billiard cloth.

Tips to repair cue yourself:

1. It is important that the top of the white cap (ferule) is and remains flat. You can do this with a stanley knife or with "abrasive ring" or "Cue tip sander Tefco" available in our shop. Never sand by hand because then the cap will become round and the tip will not have a good glue surface.

2. Roughen the bottom of the new tip on a flat piece of sandpaper (better glue connection).

3. Recommended glue "Artemis" pomeranian glue. This is a specially developed superglue that can still be corrected after gluing.

4. After gluing on one side, clamp the tip under a tip clamp.

5. After drying you can touch up the tip with a special tip sharpener or carefully with a file.

6. Sand the top of the tip into shape (slightly convex) and roughen.

7. Ready to use.